Our inflator pump is equipped with self-balancing technology for stable and accurate inflation, low power consumption, fast pumping.
Takes up very little space and can be easily stored in your car, suitable for most car types, equipped with replaceable nozzles for motorcycles, bicycles, inflatable toys, basketballs etc.
Size: 21.3 x 16.5 x 8.3cm
Cable: 300cm power cord and 60cm air hose
Maximum current: <12A
Cylinder diameter ：1 x 30mm
Air flow rate : 30 liters / min
Air pressure gauge: 100psi 6.5BAR 6KG/CM2 689KPA
Inflation time: 0~3Bar within 5 minutes for ordinary car tires
Use precautions and safety instructions:
1. This inflatable pump is limited to be used on cars, bicycles and inflatable toys. Please do not use for truck tires.
2. Before switch on this pump, please start the car engine, to prevent power shortage of the battery.
3. Monitor the inflation level carefully when using this pump, to prevent over-inflation.
4. When using the pump, the temperature of the cylinder and metal parts will increase, please do not touch to avoid burns.
5. Please store the pump in a dry and ventilated place, avoid sunlight, rain or collision.
6. Please do not use the inflatable pump continuously for more than 20 minutes, after 20 minutes of continuous operation, please turn off the power to allow the machine cools down completely before use again. The pump must be used in a safe and ventilated place.
Instruction for inflating car tyres:
1. Before using the pump, please make sure the power supply is in the correct "O" or "-" position.
2. Before using the pump, please pull up the hand brake (electronic brake) to ensure that the car will not move during use.
3. When using the inflator pump, please start the car engine to reduce the loss of the car battery, and use it under good ventilation.
4. When using the pump, please pay attention to the tire pressure during inflation to avoid damage to the tire by over-inflation.
5. When you hear the air leaking out from the tire nozzle, you should tighten the nozzle as soon as possible so that the air will not leak out.
6. Tire pressure settings vary from car to car, please refer to the manufacturer's recommended tire pressure value.
Instruction for inflating toys / balls:
1. After installing the appropriate nozzle connector, you can inflate the inflatable toys / balls, the inflation method is similar to the tire inflation.
2. During the inflating process, please use your hand to gently squeeze the inflatable product. When the inflatable reaches the proper pressure, turn off the power and disconnect the inflatable connector.
3. When inflating the inflatable toys/balls, the inflatable pressure gauge may not be able to read the pressure correctly because the pressure of the inflatable product is too low. Please use your hand or other pressure gauge to confirm the pressure value.
4. Do not leave the inflatable pump unattended when using.
This product includes only an inflator, excludes any other decoration.
Due to different lighting and screen settings, the color of the item may differ slightly from the picture.
Due to manual measurement, please allow slight difference in dimension.
What's in the box?
1 x Car inflator pump set